Applications

HiP T-Series pumps achieve a "bubble tight" pressure stall that can be used for high pressure applications such as bolt tensioning, pressure testing, power pressing, jacking, lifting, hydraulic power units, proof testing components, valve actuation and many more.

·Bolt Tensioning
·Pressure testing
·Work holding and clamping
·Jacking and lifting
·Power pressing
·Hydraulic power units
·Valve actuation
·Proof testing components
·Hydraulic cylinder actuation
·Chromatography
·Lubrication and spraying
·Liquefied gas transfer

1.T6000 SERIES PUMPS
· 6 inch air cylinder
· Available in 9 different pump ratios
· 2.5 inch pump stroke
· Maximum operating pressure of 58,000 psi (4000 bar)
· Maximum flow rate of 177 in3/min (2.9 lpm) at 80 CPM
· Inlet air pressure 15 psi to 100 psi (1 to 7 bar)
· Four different plunger seal materials
*80 CPM recommended for optimal pump seal life

2.T7500 SERIES PUMPS
· 7.5 inch air cylinder
· Available in 9 different pump ratios
· 2.5 inch pump stroke
· Maximum operating pressure of 68,000 psi (4690 bar)
· Maximum flow rate of 177 in3/min (2.9 lpm) at 80 CPM
· Inlet air pressure 15 psi to 100 psi (1 to 7 bar)
· Four different plunger seal materials
*80 CPM recommended for optimal pump seal life

1.T6000 series:230-4000 bar;
2.T7500 series:350-4690 bar.